TurboFloorPlan v15 is Released

[Jack Zimmer]

Link to infomation on the newest version TFPlan v15

Two versions Pro and Deluxe (which has some Landscape features removed)

http://imsidesign.com/Products/TurboFLOORPLAN/tabid/395/Default.aspx

Existing users should have received an email with an introductory offer.

It's good, be sure to upgrade or buy new.

Jack

[rgathje]

  I have had TurboCad, DesignCad and TFP for about 10 years and never received anything about new versions. Version 14 was out for about 2 months before I found out about it. I don't expect to see anything about an upgrade, so where and how do I get an upgrade price.

[Jack Zimmer]

Hi R Gathje

Feel free to email me and I will make sure that your info is sent to the correct people. IMSI should have your email address in thier files, but it is obvious that it has either changed or been lost. I'd be happy to see what I can do to get you back on track with them.

An active email is required. It wouldn't hurt to have your name and products purchase (versions) too.

send to:

jkzimm@charter.net

You can also :

 call 1-800-833-8082
(+1.415.483.8000 outside the United States. Monday through Friday, 8am-5pm Pacific Time)

explain your situation and ask you be put on thier mailing list.


Jack

[Jack Zimmer]

The new roof modification tool allows you to modify a roof edge  by Matching / or Retaining it's 'support' height/ or Ignoring them.

cool posiblities.

Z

LOG IN TO SEE IMAGE

[Jack Zimmer]

SNAP TRACK IS USED WITH OJBSNAP.

LETS YOU KNOW WHEN YOU ARE 'IN LINE' WITH ANOTHER OBJECT BY DISPLAYING A DASHED LINE.

NICE.

Z

LOG IN TO SEE IMAGE

[Jack Zimmer]

YOU CAN NOW DEFINE ASPECTS OF A ROOM (TYPE OF FLR/BASE/CEILING/WALLS).
THEN SET UP WHAT YOU WANT ROOM SCHEDULES TO DISPLAY

AND GET A COMPREHENSIVE ROOM SCHEDULE FOR ALL ROOMS YOU HAVE ASSIGNED INFORMATION TO.

COOL

Z

LOG IN TO SEE IMAGE

[Jack Zimmer]

ONCE DOORS AND WINDOWS ARE INSERTED
YOU JUST DEFINE WHAT YOU WANT DISPLAYED IN SHEDULE SETUP
CLICK TO INSERT
MARKERS IN DRAWING ARE KEYED TO SCHEDULE AUTOMATICALLY

COOL

Z

LOG IN TO SEE IMAGE

[Allan Chesney]

Hi Jack,

Re the Door, Window, Room Schedules:  
As you can see by my image, there is no horizontal scroll bar as there is on yours. This means there is no way to set the width of the Notes column which is very wide.  I did see a scroll bar once when I went in there but every other time it is not there.

I do not get a scroll bar on the Window Schedule either but do get it on the Room Region. EDIT: It has disappeared from Room Region schedule too.

Have you experienced this at all?

Allan

[Jack Zimmer]

I do not get a scroll bar. Have you experienced this at all?
 

Hi Allan,

Yep, all in the TurboFloorplan training videos  

It is a bit lenghty to explain but try this.

Highlight last entry in Schedule Setup dialog box (open Schedule> upper right hit Setup> then look on top list for last entry> highlight it)(For Windows/ Doors it is Description / For Room it is Area)
Go down to 'Insert' button and hit it.
A new 'Blank' option will appear above just 'before' the Notes option.
Now hit Remove

option 2 quicker

CLICK Setup > Insert > Remove

You will now have scroll.
Jack

[Allan Chesney]

Hi Jack,

I prefer option 2 - much quicker!

I fail to see the logic but it works. Personally I do not have a need for the schedules as I only do the 3D visualisations but I like to know what's there just in case.

A week or so ago I had a play with them but did not hit on the trigger to get the scroll bar to appear.

Thanks,

Allan

[Cossie Nisse]

why dosen`t it work in Windows XP 64bit?

[Draftcad]

Hi Cossie Nisse, welcome to the Forum!

According with http://imsidesign.com/Default.aspx?TabId=659-->  TurboFlOORPLAN is a 32-bit application. If you are running TurboFLOORPLAN on a 64-bit system, it will run in 32-bit mode.

Good luck

Pat

[Cossie Nisse]

I get this message when I install it, have tryed to install it in Vista pc and that works (not my computer).

Whats wrong?

Sorry if my English is bad, I normally speak Norwegian:)

[johnregi]

Hi,
Glad to know that V15 is released. I tried  to download  V15 . But the size and date of the file seems to be that of V14,
ie  562308.45 kb and  14-04-2009. Am I at the wrong link?, or shall I continue downloading. Can someone help me in this regard.

[Jack Zimmer]

the size and date of the file seems to be that of V14,

This is a new product release, not a free upgrade. If you want to 'test it out' , they have a free 15 day trial. You have to send info to IMSI and they will send you the link.


http://activate.imsisoft.com/gennedfreetrial.aspx?productpage=TFP_Pro_15

Jack