In the attached image, can the gutter be aligned with the plane of the roof. I am sure Allan you would have a solution.
Hi Bob,
Looks as though you need stronger brackets on the gutter! ;)
If you slect the gutter, right click, select Adjust to Plane then select the edge of the roof you want to align to - the sloping edge not the gable edge, it should align.
This is an odd one and you will I suspect find that the corners will break. You could try selecting both at the same time and Adjust to Plane, but, even if that maintains the 'point' it will probably still break on the other corners. You may have to fudge things so that it looks right.
Allan
Thanks Allan, that solved the problem. I could not get the gutters to mitre once moved.