In the attached image I am trying to line up the lower small ridge (bottom of image) with the larger ridge (top of image), but I am not having much success, can anyone help. I guess there is a simple method.
Hi Bob,
Increasing the roof Support Height on the left edge of the front section should do it.
Allan
Do you want the ridges at the same height?
Do you want the front ridge to align to back ridge or vice versa or neither; just aligned at some position?
You can play with the roof angles/pitch (all of them) until you get the alignment you want...and leave wall heights/roof support heights as-is.
Allan, thanks, that solved the problem.
Doug, yes I want the two ridges to be at the same height and the two ridges to line up.