I cannot turn off the Auto Roof Generation per the instructions in the TFP ver 17 User Guide . The Auto Roof menu is not displayed under the Tools Options menu. Any help would be appreciated.
Hi Tknudsen,
1 - You can activate /deactivate the Autoroof --> Click on the exterior walls' perimeter--> you will see the eave --> When you select the roof eave, the screen looks like the 1st attached image --> properties bar (right pane) --> tool options--> Options--> check "automatically generates panels" (see 2nd image attached)
The 3rd image shows how to select the eave
Note: If the Tool Options bar does not automatically display, reset it by checking Auto Display Tool Options on the Window menu.
2 - In order to remove an older roof --> Go to the Roof tab --> select the roof's pieces --> use the Delete key of your keyboard
3 - To draw additional roof pieces --> Go to the Roof tab --> use the ready to use roof shapes or the freehand roof tool
You can also Auto generate the roofs in the Quick start screen (Design Menu)
An additional tip: I have a free e-book: http://www.smashwords.com/books/view/369372 (http://www.smashwords.com/books/view/369372) that answers several questions about different topics. It was developed for Punch but as all my e-books cover all the versions, I'd suggest that you check it
Patricia
I was able to place a gable roof on the RV garage structure with the correct pitch of 5:12. I do have a problem with the whole roof now floats about 6" above all the walls. What do I need to do to correct the floating problem?
Did you solve the garage door issue and the auto roof issue? :D
In order to solve the floating problem, just select the roof and adjust the elevation