Print Page - How do I slope a ceiling so the wall appears sloped

Title: How do I slope a ceiling so the wall appears sloped
Post by: bjbateman on July 03, 2017, 09:58:18 PM

From the outside my roof/ceiling is clearly sloping with one end wall being 9' and the other being 11' the two side walls are each 9' but I can not figure out where to go from here editing walls or ceilings/roofs to make the walls have (when viewing it as 3D on the inside) the slope that the ceiling/roof has when I view it from the outside using the 3D view.

Thanks in advance

Title: Re: How do I slope a ceiling so the wall appears sloped
Post by: Patricia G. on July 03, 2017, 10:29:03 PM

Hi there,

click inside the room => go to the Information bar (right side of the screen) => unselect " Show ceiling" (see attached)=> in this way, instead of the flat ceiling, you will see the internal face of the roof as well as the sloped walls.

Title: Re: How do I slope a ceiling so the wall appears sloped
Post by: hjloomis on February 22, 2018, 10:59:55 PM

I'm wanting my ceiling to show, how do you get it to follow the slop of the wall?

Title: Re: How do I slope a ceiling so the wall appears sloped
Post by: Patricia G. on February 23, 2018, 08:45:38 AM

Hi there,

TFP doesn't include automatic sloped ceilings.
You can simulate a sloped ceiling with a piece of freehand roof or create a 3D object using the 3D Custom Workshop Power Tool.

FloorPlan User Forum

General Category - V.17 - 2026 => V17 - 2026 Looking for Help? => Topic started by: bjbateman on July 03, 2017, 09:58:18 PM