Moving drawing on different locations

[Burgo]

Is it possible to move the drawing (or elements in the drawing) on different locations at the same time., or must the drawing on each location be moved individually.  I tried to move the first floor plan to another section of the drawing sheet but only the current location would move, I then had to select the ground floor location to move the ground floor plan.

[Allan Chesney]

Hi Burgo,

This was answered a few days ago in this post http://forums.turbofloorplan.com/index.php/topic,2204.0.html, the key part of the answer being this:
... you first need to go to Settings / Program Setttings / Building Aids and untick the box "Select elements on current location only while in plan view", then go to Edit / Select All (Control+A), then right click and \select Move. If it still will not move turn Collision off (Status bar lower left).

Don't forget to un-tick the "Select elements on current location only while in plan view" box again, or you could find yourself selecting things you did not intend.

Allan

[Burgo]

Thanks Allan, again learning the tricks of the trade.